Maintenance11
Maintaining Your Fireplace's Appearance
Fingerprints or other marks left on the optional plated surface may become etched in place if they are not wiped clean prior to turning the fireplace on. Clean the plated surface with denatured alcohol and a soft cloth (with the fireplace cool). Other cleaners may leave a film that may become etched into the surface.
Battery Replacement
Power Backup Batteries
Four AA batteries are used as a power backup for the fireplace in case the household (AC) power goes out.. These batteries must be inserted into battery holder (see the illustration below). The fireplace controller will beep once these batteries start to go dead. Replace batteries before each heating season to insure proper operation.
Control Panel Light Battery
LED lights and a 9v battery are used to illuminate the control panel when the concealment cover is lifted. If the LED lights do not operate, replace the 9v battery (see the illustration below). The battery holder is held in place with Velcro and may be removed for easier access.
Battery Holder for Control
Panel Lights
9v Battery
Lift up and swing the lower grill
down to acces the area below the
AA | AA | Battery |
| ||
| Battery | |
firebox.
Swing the concealment cover
up and slide it back to expose
AA Battery
the controls.
Holder
AA | AA | Battery |
| ||
| Battery | |
AA Battery Tray
© Travis Industries | 4081205 |
