TROUBLE SHOOTING GUIDE
Problem | Possible Cause | Possible Solution |
|
|
|
|
|
Burner will not | Igniter electrode covered with | Clean igniter electrode | |
light with igniter | grease or residue |
|
|
| Igniter/electrode too far from | Adjust electrode until proper | |
| burner | spark appears (see page 5) | |
| Igniter/electrode wire loose or | Call Magma | |
| disconnected |
|
|
| Wire is shorted causing spark | Call Magma | |
| from wire before electrode |
|
|
| No spark being generated | Call Magma | |
|
|
|
|
Burner will not | No gas flow | Check fuel level, refill cylinder | |
light even with |
| or replace canister | |
match |
|
|
|
| Obstructed gas flow/debris or | Clean valve orifice and burner, | |
| spider webs in burner tube | check all lines (see page 6) | |
|
|
|
|
| Excessive cooking temperature | Operate only on low when | |
|
| lid is closed | |
|
| Reduce flame level | |
|
| Leave lid open | |
|
| Turn off one burner | |
|
| Use water spray to cool | |
| Grease and/or residue | Clean components | |
| Excessive fat in meats | Trim fat from cuts of meat | |
|
| before grilling | |
| Excessive oils in marinades | Use | |
|
|
|
|
Yellow sooty flame | Obstructed gas flow/debris or | Check and clean valve orifice | |
| spider webs in burner tube | and burner. Check gas supply | |
|
| lines (see page 6) | |
|
|
|
|
7
