8Installation
Travis Industries 4050225 100-01154
Clearances - Straight Installation
6” Minimum
3” Minimum
9” Minimum
3”
Minimum
Through the Wall Installations Interior Vertical Vents
Floor Protection
6” Minimum
2”
Minimum
9” Minimum
“Tee”
Clearances - Corner Installation
6” Minimum
Through the
Wall Vents
3” Minimum
45° Elbow
45°
3” Minimum
Interior Vertical
Vents
3”
Minimum
6” Minimum
2”
Minimum
Floor Protection
“Tee”
3” Minimum
3”
Minimum

Note: If interior vertical pellet vent is used, the clearance to the backwall is determined by the

upward-turning elbow or "Tee". It will vary in depth depending on the brand of pellet vent

used (it is approximately 5"). Before placing the heater, connect the elbow or "Tee" and

measure off the 3" clearance.