6Installation

Before You Begin

READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE THIS HEATER. FAILURE TO FOLLOW THE INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH.

Check with local building officials for any permits required for installation of this pellet heater and notify your insurance company before proceeding with installation.

Packing List

• Newport Stove

• Owner's Manual • Door Latch Tool

• Fuses (2)

• Lag Bolts (2)

Installation Options:

Residential or Mobile Home (see the section "Mobile Home Requirements")

Alcove Compatible (see the section "Alcove Installation")

Horizontal or Vertical Vent

Outside Air Compatible

Vent with L-Vent, L-Vent Fireplace Liner, or Type A Chimney (with adapter)

Planning The Installation

HINT:

Have an authorized Travis Industries dealer install this heater. If you install the heater

 

yourself, have your dealer review your installation plans.

HINT:

Sketch out a detailed plan of the installation including dimensions. Then verify the

 

dimensions with the requirements listed in this manual.

HINT:

When determining the location of the stove, locate the wall studs (for horizontal

 

penetrations) and ceiling trusses (for vertical penetrations). You may wish to adjust the

 

stove position slightly to ensure the vent does not intersect with a framing member.

HINT:

Place the heater outside and load 10 pounds of pellets inside the hopper. Plug the

 

heater in and let it run on HIGH until the pellets run out. This will cure the paint and burn

 

off any oil on the steel, eliminating any smell inside the home.

Stove Placement

Stove must be placed so that no combustibles are within, or can swing within (e.g. drapes, doors), 36" of the front of the heater.

?If the stove is placed in a location where the ceiling height is less than 7', it must follow the requirements in the section "Alcove Installation Requirements".

HINT:

REDUCING CLEARANCES - Clearances may be reduced by methods specified in NFPA

 

211, listed wall shields, pipe shields, or other means approved by local building or fire

 

officials.

Heater and floor protection must be installed on a level, secure floor.

Floor Protection Requirements

The heater must be installed on a non-combustible floor protector extending the full width and depth of the heater and extending 6" in front (Minimum 21-5/8" wide by 26-7/8" deep) (minimum .018" thick - 26 gauge) .

Must extend under and 2" to each side and rear of a chimney "Tee" (if used).

Travis Industries

Newport

2 9 0 9 0 2

Page 8
Image 8
Avalon Stoves Avanti PS manual 6Installation

Avanti PS specifications

The Avalon Stoves Avanti PS stands as a premier choice in the realm of pellet stoves, merging style, efficiency, and advanced technology. Designed to meet modern heating needs while preserving a traditional aesthetic, this stove is perfect for homeowners seeking both functionality and elegance in their living spaces.

One of the standout features of the Avanti PS is its impressive heating capacity. With the ability to effectively warm areas of up to 2,000 square feet, this stove is ideal for medium to large-sized rooms, making it an excellent choice for family gatherings or cozy nights in. Its high-efficiency ratings ensure that it produces ample heat with minimal energy consumption, which translates into savings on heating bills.

A key characteristic of the Avalon Stoves Avanti PS is its use of advanced pellet technology. The stove is designed to burn high-quality wood pellets, which are not only environmentally friendly but also produce less ash and emissions compared to traditional wood-burning stoves. This makes the Avanti PS not just a heating solution, but also a responsible choice for eco-conscious consumers. Additionally, the stove boasts an array of programmable settings, granting users full control over their heating schedule, thus enhancing convenience and efficiency.

Another significant technology featured in the Avanti PS is its integrated fan system. This feature optimizes heat circulation throughout the room, ensuring an even and consistent temperature. Users can enjoy a cozy environment without the discomfort of hot or cold spots. Furthermore, the stove operates quietly, allowing for an undisturbed atmosphere ideal for relaxing or entertaining.

The design of the Avalon Stoves Avanti PS deserves mention as well. Available in several attractive finishes, including classic black and contemporary stainless steel, it can seamlessly blend into various home decors. Its compact size does not compromise its performance yet allows for versatile placement in any space.

In summary, the Avalon Stoves Avanti PS combines high heating capacity, advanced pellet technology, efficient heat circulation, and aesthetic appeal, making it a top contender in the pellet stove market. Whether you're looking to reduce heating costs or add a stylish focal point to your home, the Avanti PS is a reliable choice that delivers on all fronts. With its user-friendly features and commitment to sustainability, it stands out as an exceptional option for modern heating needs.