External Speaker Connections
External speakers may be connected to the monitor to reproduce sound from VIDEO 1, VIDEO 2, RGB 1 or RGB 2 signal sources.
External speakers may be connected directly to the EXTERNAL SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs.
WARNING: Speakers that are installed next to the monitor must be shielded against electromagnetic field which can cause color distortion in the CRT and is not covered under the warranty.
25
If
CAUTION: Unplug the monitor and all connected components before con- necting external speakers. Use only speakers with
To connect external speakers directly to the monitor:
1.Strip the ends of the speaker wires.
2.Press down a button below the EXTERNAL SPEAKERS terminals, insert the speaker wire and release the button to secure a speaker wire connec- tion:
[a]Connect the right speaker (located at right side of the monitor when viewed from the front) positive (+) wire to RIGHT +.
[b]Connect the right speaker negative
[c]Connect the left speaker negative
[d ]Connect the left speaker positive wire (+) to LEFT +.
3. Set SPEAKER SELECT switch at EXT.
VIDEO or
RGB AUDIO L and R outputs of XP29Plus/XM29Plus
R L (MONO)
|
|
| IN |
LINE OR | LINE OR |
| |
AUX INPUT | AUX INPUT | OUT | |
|
|
|
|
L R
STEREO AMP 
To connect the monitor to stereo system speakers:
1.Connect L AUDIO output to the stereo amplifier L AUX input.
2.Connect R AUDIO output to the stereo amplifier R AUX input.
3.Set SPEAKER SELECT switch at EXT to use external speakers only. For center channel audio fill, set SPEAKER SELECT at INT for sound from both monitor and external speakers.
IMPORTANT: Do not connect speakers to both the monitor EXTERNAL SPEAKERS terminals and to the stereo amplifier. This could damage both the monitor and the speakers.
26
