You have two ways to finish the installation of your Seattle Electric fireplace within your home. You can use one of our fireplace cabinet systems. Or you can build it into an existing wall or chase and sheetrock up to the face, then finish it off like a traditional fireplace with a mantel and stone or tile.
Sterling™ Fireplace Cabinets
If you are looking for exceptional value, add one of our Sterling fireplace cabinet systems and you can have your new Seattle Electric fireplace installed in less than one hour! These fireplace cabinets allow the fireplace to be installed against any wall in your home. Fireplace cabinets make it easy to relocate your fireplace at any time. Take the beauty and heat to other rooms, or take it with you when you move.
A 15 AMP, 110 VOLT wall outlet is required. A dedicated circuit is preferred but not essential in all cases.
Sterling™ Fireplace
Cabinet Dimensions:
52 5/8” Wide
43” High
17 1/2” Deep
Sterling™ | Sterling™ |
Walnut Finished | |
Fireplace | Oak Finished |
Cabinet | Fireplace |
| Cabinet |
Installation Without A Fireplace Cabinet
If you want a
MINIMUM internal opening dimensions shown to the right.
The electric fireplace must be able to slide out for service. You must also provide a standard 15 AMP - 110 Volt wall outlet, preferably on its own breaker, within the enclosure to allow the fireplace to be plugged in. The enclosure must allow the fireplace to easily be removed for service. The fireplace cannot be hardwired.
CAUTION
Clearance for air circulation beneath the fireplace is critical. DO NOT INSTALL THE FIREPLACE DIRECTLY ON CARPET OR SIMILAR SURFACES WHICH MAY RESTRICT AIR CIRCULATION.
11 3/4”
26 3/4”
Unit must slide out for service
31 7/8”
Visit us online:
www.avalonfirestyle.com
We reserve the right to improve our products at any time without prior notification.
Photos and illustrations are for descriptive purposes only. Copyright ©2007 T. I. - Printed in the USA | #98800137 |