Avalon Stoves Seattle E The Atmosphere Is Electric, It’s Really That Easy, It’s All In The Fire

™

The Atmosphere Is Electric!

Add the warmth and glow of a real fireplace where you could not before with Avalon’s new Seattle Electric fireplace.

To most people, adding an electric fireplace means heading to your local ‘Home Improvement Warehouse’ and buying a plain black firebox with a veneered surround that looks like a cheap add-on to the room. With The Seattle™ E we’ve designed an electric fireplace that not only fits within the home’s architectural style, but dazzles the eye and seduces the senses with its gorgeous, dancing flames and glowing embers.

It’s Really That Easy!

Operating from any 110 volt wall outlet, the Seattle E is conveniently plug-and-play. Ideal for apartment renters, condo owners, basements, offices, bedrooms, and today’s busy lifestyle. No chimney, vent or gas access is needed for the Seattle E to burn brightly. And, when you move - take your fireplace with you!

It’s All In The Fire!

The radiating, pulsating fire of the Seattle E can be viewed through 564 square inches of glass. A custom, high quality log set glows as the fire appears to burn and the ember bed flickers. The light intensity of the flame can be modulated with the remote control, as well as the speed of the flame. The remote control also has the ability to control the interior accent light, sleep timer, room temperature, power, and clean air system.

Clear Up The Air!

The Seattle E features the patented Purifire™ clean air system. The system uses a built-in fan to circulate and purify the air of an average room (12’ X 14’) four times per hour.

Add A Little Warmth!

A built-in heater and circulating fan is yet another feature of the fireplace. Producing 5,000 Btu’s and heating up to 400 square feet, the fireplace serves perfectly for adding supplemental heat to the room the fireplace is in. Operating costs when used with the built- in thermostat averages about 8 cents* and hour.

Add A Fireplace Anywhere:

Build the Seattle E into an existing wall or chase and sheet-rock up to the face. Or you can finish it off like a traditional fireplace with stone or tile. Shown with the Bungalow face and J. C. Huffman Osage mantel.

With The Remote

You Control:

1. Room Temperature

2.Thermostat - Set Room Temperature 3. Accent Light Dimmer - Hight to Low

4. Flame Speed - Hight to Low

5. Sleep Timer

6. Purifire® High to Low

7.Flame & Heat On/Off

8. Purifire® On/Off

Purifire™ Clean Air System:

The filter is easy to remove and clean. The system is designed to circulate and clean the air in an average room 4 times per hour. This system is designed to remove any impurities, spores and dust as small as one micron from your home.

*When used with thermostat. This may vary with your local utilitie costs.

*Purifire is a registered trademark of Dimplex™ N. A. A.