IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

•Read all instructions before using the refrigerator.

•DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous. . . even if they will “just sit in the garage a few days.”

•Before you throw away your old refrigerator: Take off the doors. Leave the shelves in place so that children may not easily climb inside.

•Never allow children to operate, play with, or crawl inside the refrigerator.

•Never clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion.

•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other refrigerator. The fumes can create a fire hazard or explosion.

-Save these instructions-

INSTALLATION INSTRUCTIONS

Before Using Your Unit

•Remove the exterior and interior packing.

•Check to be sure you have all of the following parts:

•3 Glass Shelves (2 Full size / 1 Half size)

•1 Instruction Manual

•Before connecting the unit to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

•Clean the interior surface with lukewarm water using a soft cloth.

Installing Your Unit

•This appliance is designed to be free standing only, and should not be recessed or built-in.

•Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To level your unit, adjust the leveling legs at the bottom of the unit.

•Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to cool the compressor and condenser.

•Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.

•Avoid locating the unit in moist areas.

•Plug the unit into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.

•After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing food in the refrigerator compartment.

7

Page 6 Page 8
Page 7
Image 7
Avanti AR323SB Important Safety Instructions, Installation Instructions,  Before Using Your Unit,  Installing Your Unit
Page 6 Page 8

AR323SB, AR321BB specifications

The Avanti AR321BB and AR323SB are innovative and stylish countertop compact refrigerators designed to fit seamlessly into modern kitchens, offices, or dorm rooms. Both models offer high efficiency, utility, and aesthetic appeal, catering to users seeking space-saving solutions without compromising on performance.

The AR321BB features a sleek black finish, while the AR323SB boasts a stainless steel design, ensuring they complement any decor. With a compact size of approximately 3.2 cubic feet, these refrigerators are ideal for small spaces, yet still provide ample storage for beverages, snacks, and perishables.

One of the key features of the Avanti AR321BB and AR323SB is their adjustable thermostat, allowing users to easily regulate the internal temperature to cater to various storage needs. This capability is supported by a powerful yet energy-efficient compressor cooling system that keeps items fresh without consuming excessive power, making both models environmentally friendly.

The interior of both refrigerators offers versatility with removable shelves and door bins, enabling users to customize the storage layout depending on the items they need to store. The full-width wire shelves can be adjusted to accommodate taller items, while the removable door bins provide additional space for bottles and cans, enhancing overall organization.

Another significant characteristic is the quiet operation of both models, making them perfect for use in quiet environments like bedrooms or offices. The low noise level is a result of advanced insulation and smart engineering, ensuring a peaceful experience.

Additional features include a reversible door, allowing for flexible placement in any space, and energy efficiency that meets or exceeds government standards. The energy-saving design not only reduces electricity costs but also makes these refrigerators an environmentally conscious choice.

In summary, the Avanti AR321BB and AR323SB are practical solutions for individuals needing compact refrigeration options without sacrificing quality. Their stylish designs, customizable interiors, and energy-efficient operation make them stand out in the marketplace, appealing to modern users who value both functionality and aesthetics in their appliances. Whether for personal use, workspaces, or as supplemental storage, these compact refrigerators are a reliable choice.
Top Page Image Contents