Avanti BCA5448  Storage,  Interior Light,  Shelves,  Installing Stainless Steel Handle

STORAGE

Many cans may differ in size and dimensions. As such the actual number of cans you may be able to store may vary.

INTERIOR LIGHT

If you would like the light ON press the button and the interior light will be turned ON. The light will automatically turn OFF after 10 minutes.

SHELVES

∙To prevent damaging the door gasket, make sure to have the door all the way opened when pulling the bottom shelf out of the rail compartment.

∙For easy access to the storage content, you must pull the shelf approximately 1/2 out of the rail compartment, however this unit was designed with a plastic post on each sides of the shelf track to prevent bottles from falling.

∙When removing the shelf out of the inner rail, make sure to remove all items first. Then move the shelf to the position where the notch of shelf is exactly under the plastic post and lift the shelf. In order to replace the shelf, repeat steps described above in reverse.

INSTALLING STAINLESS STEEL HANDLE

This wine chiller includes a stainless steel handle that is not required to operate this unit. To install the handle please follow the below instructions:

1.Pull away the door gasket in the area where the handle is to be installed as shown below in Illustration # 1. The gasket is easily displaced by hand, no tools are necessary.

2.Align the handle with the screws pre-installed on the backside of the door. Tighten the screws using a Phillips head screwdriver until the handle sets both flush and secured tightly against the door frame. (DO NOT overtighten as this will cause damage to the handle assembly).

3.Replace the door gasket to its original position.

1		2
1 Gasket	2 Screw	3 Screwdriver	4 S/S Handle

10