Studer Innotec
22
INFORMATION ON THE OPERATING MODE OF THE INSTALLATION There are two different views for displaying information on the system :
A simplified and a configurable display. When one of these two displays is visible, it is possible to
activate or deactivate the system. For further information, please refer to the paragraph on
activating and deactivating the combi Xtender.
The simplified display only indicates the current time and
the mode of the Xtender (ON or OFF)
The configurable display shows the system in its entirety, represented by a synopsis of distinct
information blocks.
• Information on the battery (A)
• Information on the grid input (B)
• Information on the grid output (C)
• Information on the auxiliary contacts (D)
• Information on the transfer and output relays (E)
• Information on the power sharing mode of the smart boost (F)
• Information on possible locking of the function (G)
Two pieces of information related to blocks A, B and C may be viewed simultaneously. To change
displayed information, proceed as follows:
Press the key SET (one of the pieces of information is
displayed in inverse video).
Go to the value to be changed using the UP and DOWN
keys.
Enter into modification using the key SET. You may now
view the values that can be displayed in this area.
Using the keys UP and DOWN, select the new information
that you want to appear.
Confirm your selection using the key SET.
To escape at any time, use the key ESC to return to the starting display.