Studer Innotec RCC-02, RCC-03 UPDATING PROCESS , COMPATIBILITY

RCC

45

UPDATES

The RCC remote control program as well as the code in the inverters/chargers of the Xtender series

can be updated in order to integrate new features.

For the RCC remote control it is also possible to implement new display languages (up to a

maximum of 4 on each RCC remote control). You may obtain information about the availability of

updates or additional languages from your installer or consult the website: www.studer-

innotec.com.

UPDATING PROCESS

Before introducing the SD card to carry out the updating, do switch off all Xtenders

(off).

To carry out an update, enter the SD card containing the correct files in the RCC remote control

slot intended for this.

The system checks the compatibility of the hardware with the software present on the SD card and

if it proves to be compatible the update is carried out automatically.

The SD card must not be removed before the end of the updating process. Yet if the updating

process is interrupted, the SD card has to be inserted again and the process will carry on.

The steps of the updating process are the following:

• Updating the code of the remote control.

• Updating of the files of the remote control.

• Updating of the files of the inverters.

• Updating of the code of the inverters.

The updating process takes 3 to 15 minutes, depending on the number of inverters connected to

the remote control.

Once the update has been carried out, the remote control displays the basic screen and you have

immediate access to the new functions.

When there is a change of language, the system restarts automatically with the new language as

the current language.

If the installation consists of several remote controls, each of them has to be updated separately.

Beware: the updating will stop the running of all Xtenders connected to the remote

control.

COMPATIBILITY

Studer Innotec guarantees the compatibility of the software updates with the hardware for one

year, starting from the date of purchase. The updates are no longer guaranteed beyond this date

and a hardware upgrade may be required. Please contact your reseller for any additional

information on compatibility.

Contents

Main Page Page Page Page Page FOREWORD CONVENTIONS PRODUCT RECYCLING STUDER INNOTEC CONTACT DETAILS YOUR RESELLER CONTACT DETAILS WARNINGS AND CAUTION WARRANTY LIMITATION OF RESPONSABILITY SAFETY INSTRUCTIONS ACCEPTANCE OF THE SOFTWARE LICENCE AND UPDATES Page INTRODUCTION MODELS CONCERNED CONTROLS AND INDICATORS SD CARD Studer Innotec CONNECTION SERIES CONNECTION Page Studer Innotec QUICK START GUIDE ADJUSTMENT OF THE LANGUAGE ADAPTATION TO THE SOURCE ADAPTATION TO THE BATTERIE Studer Innotec ACTIVATION OF THE FUNCTION SMART-BOOST BASIC DISPLAYS ACTIVATING AND DEACTIVATING THE COMBI XTENDER ADJUSTMENT OF THE RCC REMOTE CONTROL ADJUSTMENT OF THE LANGUAGE {5000} ADJUSTMENT OF DATE {5002) AND TIME {5001} ADJUSTMENT OF THE CONTRAST {5006} ADJUSTMENT OF THE BACK-LIGHTING {5007} Back-lighting always off {5008} INACTIVITY PERIOD BEFORE RETURNING TO THE STANDARD DISPLAY {5010} DURATION OF DISPLAY FOR QUICK MESSAGES {5011} ACOUSTIC ALARM {5027} USER LEVEL {5012} DRIVE THE REMOTE CONTROL TO THE USER LEVEL BASIC {5019} Backup of remote control configurations {5015} Backup of Xtender configurations {5017} Loading the remote control configurations {5016} Loading the Xtender configurations {5018} Loading a master file {5034} INFORMATION ON THE OPERATING MODE OF THE INSTALLATION DISPLAY OF THE PARALLEL AND THREE-PHASE SYSTEMS Studer Innotec EVENT HISTORY ALARM LOW BATTERY VOLTAGE STOP BATTERY VOLTAGE TOO LOW STOP HIGH BATTERY VOLTAGE MESSAGE AC IN SYNCHRONISATION IN PROGRESS ERROR INCORRECT INPUT FREQUENCY ERROR INPUT VOLTAGE TOO HIGH ERROR INPUT VOLTAGE TOO LOW STOP INVERTER OVERVOLTAGE STOP OVERTEMPERATURE MESSAGE POWER SHARING EXCEEDED; TRANSFER PROHIBITED ERROR VOLTAGE AT AC OUT ERROR PHASE NOT DEFINED STORED EVENTS ADJUSTMENT OF THE COMBI XTENDER GENERAL CONFIGURATION ON A SYSTEM WITH SEVERAL XTENDERS UTILISATION AND ACCESS LEVELS PRE-DEFINED FUNCTIONS OF THE AUXILIARY RELAYS MENU Basic configurations {1100} Maximum current of the AC source (power sharing) {1107} Locking {1123} Automatic restart {1129} Studer Innotec Restore default configurations {1395} Battery cycle and charger {1137} Page Page Charge current {1138} Temperature correction coefficient {1139} Battery maintenance voltage (floating) {1140} Force passage to floating mode {1467} New cycle {1141} Studer Innotec Absorption phase {1451} Equalization phase {1452} Page Studer Innotec Inverter configurations {1186} Standby level {1187} Output voltage {1286} Level of battery under-voltage at no load {1108} Acoustic alarm of the battery under-voltage {1196} Combi configurations Inverter-Charger {1197} Minimum AC In voltage to authorise the charging {1309} Transfer AC-In for delayed transfer opening {1199} Studer Innotec Delay before passing to inverter {1198} Configurations for auxiliary contacts 1 and 2 {1201} {1310} Simple functions Switching mode {1202} {1311} Combination of events mode {1497} {1498} Studer Innotec Limit the time of activation {1512} {1513} Maximum duration of activation {1514} {1515} Temporal restrictions {1203} {1312} Contacts activated by an event {1455} {1456} Contacts activated by the battery voltage {1245} {1353} Studer Innotec Contacts activated by inverter power or smart boost {1257} {1366} Contacts activated with set schedules {1269} {1378} Extended functions {1489} Generator startup {1490} Generator startup {1491} Duration of starter impulse {1492} Number of startup attempts {1493} REMOTE CONTROLS XTENDER UPDATES UPDATING PROCESS COMPATIBILITY Studer Innotec APPLICATION EXAMPLES GNRAL USE : INVERTER, CHARGER WITH GRID USE OF A LIMITED POWER SOURCE USE TO INCREASE THE POWER ON AN EXISTING INSTALLATION LOAD SHEDDING OF THE SECOND PRIORITY LOADS Studer Innotec ANNEXES ANNEXE 1 : LIST OF CONFIGURATION INTERDEPENDENCIES