Studer Innotec
30
Number of critical battery under-voltages before final stop {1305} and
Leadtime to counting the critical battery under-voltages allowed before final stop {1405}
The critical battery under-voltages can also be automatically acknowledged in case of
undervoltage disappearance. Like for the under-voltages (see previous paragraph) you can adjust
the number of restarts of the inverter and Smart-boost functions once the fault disappears.
Restore default configurations {1395}
Use this function to re-establish the original combi Xtender adjustments.
If your installer has carried out settings while commissioning your installation, this
function brings back these settings and not the factory settings.
Battery cycle and charger {1137} These configurations are intended to adjust the battery charge cycle to the data supplied by its
manufacturer. The basic battery cycle is described in the Xtender manual.
Caution : the Xtender charger is meant only to the charge of lead batteries.
Note: Incorrect values may lead to early ageing or even the destruction of the
batteries.
For further information, contact your battery supplier who will give you the correct values.
The graphic presentation of the battery cycle shows the options for linking the various phases: