Chapter 3 Menu Options
Print Config.
This option is used to print a listing of various stored printer configurations. It is recommended you store printouts of your configurations in a safe place for quick referral.
Delete Config.
You can delete one or all of your eight customized configurations. The factory default configuration cannot be deleted.
Power-Up Config.
You can specify which of the nine configurations (Factory or
Protect Configs.
You can specify whether or not a new configuration should overwrite an existing configuration when you activate the Save Configs. parameter. When disabled (default), the new configuration will overwrite the existing configuration. When enabled, the new configuration will not overwrite the existing configuration, and the message “CONFIG. EXISTS / Delete First” displays.
Name Configs
You may specify a 15 character name which can be used to refer to a configuration. The name you enter for a configuration will be used in the Load Config., Save Config., Print Config., Delete Config., and
When you move into the Name Configs menu, the top line of the display shows the current configuration name. The second line of the display is initially the same as the top line. You can modify the second line of the display without affecting the top line until the ENTER key is pressed, which sets the modified name as the current selection.
Press the UP or DOWN (5 or 6) keys to cycle through the values available for that character at the cursor location. Press the NEXT (4) key to move to the next character to be modified. Press the PREV (3) key to go back to a character you have already modified. Continue until you have entered the name you want to give to this configuration, then press ENTER to save. The name you entered will now represent this configuration on the printer's front panel. To exit this menu without saving, press any key other than the ENTER key. The configuration name will revert to the last saved value.
Reset Cfg Names
You can reset specific configuration names back to the default value of the configuration number.
66
