Printronix T4204 manual Format, Power Up F, Power Up PY

IGP/VGL Submenu

•Enable. Selects the ignore mode as the power-up default, and selects the graphics mode ^PY as the power-up default. All characters are ignored until a ^A command is received.

Power Up ^F

•Disable. The default.

•Enable. Selects free format mode as the power-up default, and selects the graphics mode ^PY as the power-up default. Free format causes the VGL to ignore carriage returns, line feeds and all characters below hex 20 sent from the host.

Power Up ^PY

•Disable. The default.

•Enable. Selects the graphics mode ^PY as the power-up default.

Page Format

LPI

•Range of 6-10 lines per inch (lpi), with 6 being the default.

Btm Margin Ctl

•Determines the page’s bottom margin. If this option is set to VGL Text Length, then Text Length changes the bottom margin value in the LP+ sub-menu as follows: bottom = physical page length-top margin-text length. If the option is set to LP+ Menu, then a change in text length has no effect and the bottom margin setting in the LP+ menu will be used although the new text length value still shows in the menu.

Text Length

•Is the printable length on the page below the top margin. It is in character lines at the lpi in effect when the new value is entered.

Autoeject

•Determines paper handling upon exiting the IGP/VGL Repeated Form and Dynamic Form commands. DISABLE holds the print position at the bottom of the form. ENABLE issues a form feed after the last form is printed so all pages will be physically printed.

Copy Count

•Determines the number of identical copies of each physical page that will be printed.

Host Forms Length

•Sets the printer page size. DISABLE sets the printer page size equal to the Page Length set in the front panel under the PRINTER CONTROL menu. ENABLE sets the printer page length equal to the software host form length.

115