Chapter 3 Menu Navigation
| Table 1: Key Function Summary - Secondary Control Panel | |
|
|
|
Key |
| Function |
|
|
|
CLEAR |
| If a fault condition exists, pressing this key clears the fault message |
|
| and returns the printer to offline mode. |
|
| NOTE: If the fault condition is not corrected before pressing CLEAR, |
|
| the message reappears when attempting to place the printer |
|
| online. |
|
|
|
PRT CONFIG |
| Prints the current printer configuration menu settings (offline mode |
|
| only). |
|
|
|
JOB SELECT |
| Selects a specific printer configuration menu (offline mode only). |
|
|
|
ENTER |
| Selects the current value within the printer configuration menu (offline |
|
| mode only) and displays an asterisk (*) next to the value. If the ENTER |
|
| key is locked, the value will not be selected and an “ENTER SWITCH |
|
| LOCKED” message displays for one second, followed by a display of |
|
| the previously selected value. Pressing the UP and DOWN keys at the |
|
| same time unlocks the ENTER key and permits value selection. |
|
|
|
UP (5) |
| This key causes the printer to go up one level in the menu structure |
|
| (offline mode only). |
|
|
|
DOWN (6) |
| This key causes the printer to go down one level in the menu structure |
|
| (offline mode only). |
|
|
|
PREV (3) |
| If the menu selection is a value, pressing this key causes the value to |
|
| be decremented. If the menu selection is an option, pressing this key |
|
| allows selection among options on the current menu level. Holding the |
|
| key down causes the key to repeat at about seven times a second |
|
| (offline mode only). |
|
|
|
NEXT (4) |
| If the menu selection is a value, pressing this key causes the value to |
|
| be incremented. If the menu selection is an option, pressing this key |
|
| allows selection among options on the current menu level. Holding the |
|
| key down causes the key to repeat at about seven times a second |
|
| (offline mode only). |
|
|
|
UP+DOWN |
| Simultaneously pressing these keys unlocks or locks the printer menu |
(5+6) |
| (offline mode only). This is the default key combination for locking/ |
|
| unlocking the secondary control panel. You can change the key |
|
| combination. See page 72. |
|
|
|
NEXT+PREV |
| Simultaneously pressing these keys enables a printer soft reset (offline |
(4+3) |
| mode only). |
|
|
|
52
