Printronix T4204 manual Printing a Configuration

Chapter 3 Menu Navigation

b. Press the 3or 4 key until the following displays:

CONFIG. CONTROL

Delete Config.

c.Press the 6 key.

d.Press the 3or 4 key to cycle through the options (1-8). When the desired number displays, press the ENTER key to select it. The following message is displayed.

Deleting

Configuration

Then, the following displays when it is deleted:

Delete Config.

X*

5.Save the new configuration as described in the page 57. Make sure you select the same number (e.g., Config. 1) when saving the modified configuration. The new configuration writes over the existing one.

6.Print a copy of this newest configuration (see below) and store it in a safe place.

Printing A Configuration

Print and store your configurations for future reference. The printout provides a list of the parameters that were set when you configured the printer. A sample configuration printout is shown in Figure 4.

To print a configuration:

1. Press the PAUSE key to take the printer offline.

OFFLINE

CONFIG. CONTROL

2. Press the 6 key for the following display:

CONFIG. CONTROL

Load Config.

3. Press the 3 or 4 key until the following displays:

CONFIG. CONTROL

Print Config.

4. Press the 6 key.

60