Chapter 2 Label Peel Off

Label Peel Off

The printer can be set to automatically peel off labels from the backing liner and dispense them one at a time while rewinding the liner. This configuration requires use of the printer’s label rewinder.

1.Remove the front door insert cover from the front door of the printer. Slide the insert cover up to unlock it, then push it out of the front of the door assembly.

2.For Peel-Off mode, flip the label taken sensor gate down.

3.If the label rewinder bracket is mounted on the platen tear bar assembly at the front of the printer, remove it and secure it in the stored position as shown.

1

3

2

Legend:

1)Front Door Insert Cover

2)Label Taken Sensor Gate

3)Label Rewind Bracket

4.With the label stock already loaded and the front door open (To load labels, see “Loading Roll Media” on page 29) thread the label liner around and below the platen roller assembly.

44

Page 44
Image 44
Printronix T4204 manual Label Peel Off