LinePrinter Plus Serial Matrix Emulation
LinePrinter Plus Serial Matrix Emulation
Printer
Protocol
(from page 125)
Serial Matrix
Control Code
06
6.0LPI
8.0LPI*
10.3LPI
| Define CR |
| Auto LF |
|
| Code |
|
|
|
|
|
|
|
|
| CR = CR* |
| Enable* |
|
| CR = CR + LF |
| Disable |
|
Overstrike
Enable*
Disable
Define LF
Code
LF = LF*
LF = CR + LF
* = Factory Default
Printer Select
Disable*
Enable
Alt. Set
SFCC d
Command
Control Code* | (see page 141) Even dot plot* |
Printable | Double high |
Control Code 06
Control Code 06 defines the function of ASCII code hex 06 (ACK). You can select an alternate line spacing of 6, 8 or 10.3 LPI.
Define CR Code
This option controls the action of the printer when it receives a Carriage Return code (hex 0D) from the host computer. If this feature is enabled, each time the printer receives a Carriage Return, it inserts an additional Line Feed code (hex 0A) into the data stream. Do not use this feature if the host computer sends Line Feeds to the printer.
•CR = CR. Does not insert an extra Line Feed after each Carriage Return.
•CR = CR + LF. Inserts an extra Line Feed after each Carriage Return. The next print position will be print position 1 of the next line.
Auto LF
The Auto LF option defines the printer actions when print data is received past the forms width setting.
•Enable. Performs an automatic carriage return and line feed when data is received past the forms width.
•Disable. Discards any data past the forms width.
139
