142
Chapter 3 LinePrinter Plus Emulation
LinePrinter Plus Proprinter XL Emulation
Define CR Code
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. Do not use this feature if the host
computer sends Line Feeds to the printer.
•CR = CR. Does not insert an extra Line Feed after each Carriage Return.
•CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
Auto LF
This option defines the printer actions when print data is received past the
forms width setting.
•Enable. Performs an automatic carriage return and line feed whe n data is
received past the forms width.
•Disable. Discards any data past the forms width.
Define LF Code
•LF = LF. Does not perform an automatic carriage return when a line feed
command is received. The next print position will be the current print
position of the next line.
•LF = CR + LF. Forces an automatic carriage return with each line feed
command received. The next print position is position 1 of the nex t line.
Printer
Protocol
(from page 125)
Define CR
Code Auto LF Define LF
Code FF Valid at
TOF Character Set
20 CPI
Condensed
CR = CR*
CR = CR + LF Enable*
Disable LF = LF*
LF = CR + LF Enable*
Disable
(see page 144)
Enable*
Disable
* = Factory Default
Proprinter XL