Chapter 3 Coax/Twinax Emulation

Device Address

Allows you to set the device address from 0 through 6. The host directs data and commands on the twinax line to a specific device based on its unique device address. After the address has been changed, a POR status is sent to the host.

5225 World Trade

The 5225 emulation has a standard multinational character set that serves as a base and 14 extended world trade character set assortments.

Cancel IGP/DCU

Enable. Cancels all buffers when a job is put on hold from the host, or the CANCEL key is pressed.

Disable. Does not cancel any internal buffer in the printer when a job is put on hold from the host, or the CANCEL key is pressed.

PTX Transparent

Lead-in Char.

You can enable additional features that are not available in standard Twinax emulations. To access these features, send text commands in the data stream. The commands must have a start and end code. Three sets (each containing a start and end code) are available:

Set 1. start code: <% end code: >

Set 2. start code:¬¬ end code: $

Set 3. start code: _% end code: _

Alt. Set 80-9F

Printable. Prints data in the range of hex 80 through hex 9F.

Control Code. Interprets data in the range of hex 80 through hex 9F as a control code.

160

Page 160
Image 160
Printronix T4204 manual Device Address, World Trade, PTX Transparent, Lead-in Char