Coax Emulation Menu

Format Control

Enables the printer to reflect the same spacing as CTPC model printers after absolute and relative move commands are executed.

Disable. Reflects distance, generated by the IGP/VGL feature, IGP/PGL feature, and Hex Transparent control code sequence, in the new position (after horizontal and vertical tabs are executed).

Enable. Does not reflect distance, generated by the IGP/VGL feature, IGP/PGL feature, and Hex Transparent control code sequence, in the new position (after horizontal and vertical tabs are executed).

Max. Print Width

Set the maximum print width the printer will print when using a C/T host interface.

13.2 inches

Printer Width (the width of the T4204, or 4.10 inches)

Buffer Print

Disable. The printer will print normally.

Enable. The printer prints the EBCDIC data and control codes received from the host as hex values.

NOTE: Use of this parameter may alter print attributes set by the host computer. A power cycle may be required after changing Buffer Print from enable to disable.

157

Page 157
Image 157
Printronix T4204 manual Format Control, Max. Print Width, Buffer Print