Printronix T4204 manual Margins Physical, Perforation Skip, Form Width, Host Forms Length

LinePrinter Plus Submenus

Margins - Physical Page

•Left Margin. Set in inches. Inch zero is defined as the far left edge of the page, and column numbering increments from left to right.

•Right Margin. Set in inches. Inch zero is defined as the far right edge of the page, and column numbering increments from right to left.

•Top Margin. Defined in inches, starting from inch zero at the top of the page and incrementing from the top down.

•Bottom Margin. Defined in inches, starting from inch zero at the bottom of the page and incrementing from the bottom up.

Perforation Skip

•Disable. Allows printing on page perforation.

•You may set up a skip-over margin of 1/2 inch, 2/3 inch, 5/6 inch, or 1 inch. For example, a skip-over margin of 1 inch allows a 1 inch margin at the bottom of the page.

Forms Length

Forms length is the number of lines that can be printed on a page. You can set forms length in inches, or as a function of the current LPI (lines per inch).

Form Width

The forms width can be specified in inches, millimeters, or as a function of the current CPI (characters per inch). The forms width set should not exceed the actual paper width.

Host Forms Length

•Disable. The default. Sets the form length equal to the PRINTER CONTROL menu Page Length value.

•Enable. Sets the form length equal to the form length specified in a host software command.

NOTE: When the optional CTHI (Coax/Twinax Host Interface) is selected Host Forms Length must be set to Disable.

131