Printronix T4204 manual Alarm, Power-Up State, Hex Dump Mode, PTX Setup Option, Display Language

Chapter 3 Menu Options

Alarm

•On. An audible alarm sounds (3 beeps) when a fault occurs, such as a paper jam.

•Continuous. A continuous audible alarm sounds when a fault occurs, which can be stopped by pressing CLEAR.

•Off. No audible alarm will sound.

Power-Up State

•Online. The printer powers up in the online state.

•Offline. The printer powers up in the offline state.

Hex Dump Mode

A hex code printout (or hex dump) translates all incoming data to hexadecimal equivalents. A hex dump lists each ASCII data character received from the host computer, together with its corresponding two-digit hexadecimal code. Hex dumps can be used to troubleshoot some types of printer data reception problems. Hex Dump Mode is supported with a minimum media width of 4.10 inches.

NOTE: Narrower media will result in characters missing or truncated in the printout.

PTX SETUP Option

Selects the Special Function Control Code for the PTX SETUP command and functions.

•Setup Parse. Disables or enables the PTX SETUP command.

•Setup SFCC. Allows you to choose the hex value of the ASCII character you wish to use as the SFCC for the PTX SETUP command. Valid hex values are 01-FF. The default value is hex 21, which corresponds to the “!” character.

Display Language

This parameter chooses the language that will appear on the LCD: English, Spanish, French, Italian, or German.

Reset Cmd CFG Ld

When the printer receives a host data stream reset command (ESC @ or ESC[K) in addition to resetting printer variables, the selected configuration will be loaded.

•Disable. The active emulation parameters are loaded when the reset command is executed.

•Power-Up Config. The power-up configuration is loaded when the reset command is executed.

70