IGP/VGL Submenu

True Vert 1/10

Disable. When disabled (the default) and in High Resolution, a vertical line’s length in one inch and 1/10 inch increments is interpreted as 70/72 inch and 7/72 inch respectively.

Enable. When enabled, a vertical line’s length is interpreted exactly, which is 72/72 inch in one inch increments.

Absorb after ^PY

Absorb Motion. Prevents paper motion following a system terminator in a graphics ^PY command.

Absorb All. The system ignores all the data and terminator until a host generated terminator is detected.

Disable. System terminators following a graphics command are sent to the printer and result in paper motion.

UPC Descenders

Enable. UPC/EAN bar codes are printed with descenders, even if there is no human readable data.

Disable. UPC/EAN bar codes are printed without descenders if there is no human readable data.

Rot. Char Size

Adjusted. Rotated (clockwise/counterclockwise), expanded characters have a different size than an unrotated character with the same size parameters.

Not Adjusted. Rotated, expanded characters will be the same size as unrotated characters with the same size parameters.

Ignore Spaces

Disable. Trailing spaces are not deleted from alphanumeric elements in a graphics pass.

Enable. Trailing spaces are deleted from alphanumeric elements in a graphics pass.

Midline PY (includes ^PN)

Disable. The Graphics mode Enabled command, ^PY, must be the first three characters of a line.

Enable. The ^PY or ^PN can occur anywhere in a line.

117

Page 117
Image 117
Printronix T4204 manual True Vert 1/10, Absorb after PY, Rot. Char Size, Ignore Spaces, Midline PY includes PN