MAINT / MISC Menu
•Current Config. The currently selected configuration is loaded when the reset command is executed.
•Factory Config. The factory installed configuration is loaded when the reset command is executed.
Downloaded Fonts
•Char Operations. Allows you to delete a character from flash, load a character from flash, save a character to flash, and delete a character from RAM.
•Ld Char at PwrUp. Allows you to disable or enable loading a character at power up.
•Set Operations. Allows you to delete a character set from flash, load a character from flash, save a character set to flash, and delete a character set from RAM.
•Ld Set at PwrUp. Allows you to disable or enable loading a character at power up.
File System
•Overwrite Files. Allows you to prevent files from being overwritten by disabling the overwrite function.
•View File List. Displays the list of files in the file system. Pressing the DOWN key displays the file size.
•Delete Files. Displays the list of files in the file system. Pressing the ENTER key deletes the file displayed on the front panel.
•Optimize & Reboot. Reclaims flash space from deleted flash files. After pressing ENTER, wait for the printer to reboot.
•Print File List. Prints a summary of the files stored in flash memory and several statistics on File System usage.
IMPORTANT Do not turn the printer off until it has completely rebooted and is either back online or offline.
Cancel Key
When enabled, the CANCEL key may be used to clear all data in the print buffer without printing any of the data.
Auto Locking
•Disable. The ENTER key must be locked manually.
•Enable. The printer automatically locks the ENTER key five minutes after the last front panel key press.
71
