Chapter 3 Menu Options

Tear-Strip Time

When using Tear-Off Strip media handling, the Tear-Strip Time option specifies the number of seconds after the buffer is empty that the printer will wait before it advances media to the tear off position.

Clip Page

This option determines how the printer handles images that are too large for one physical page length.

Disabled. When the user selected page length is greater than the physical page length, the printer continues to print the remaining excess data onto the next physical page. The media sensor looks for the gap notch, hole, or black mark only after the label has advanced the distance specified by the Page Length value in the Printer Control menu, or by the host forms Length value sent via host software. Any gaps, holes, notches, or black marks that exist prior to reaching the Page Length or Host Forms Length value will be ignored.

Enable. When the user selected page length is greater than the physical page length, the printer clips the excess data to fit the physical page. The excess data is lost. The media sensor will constantly look for the gap, notch, hole, or black mark, and when detected will use it as the Top-Of- Form Position for the next page and clip any excess data for the previous page.

Error Recovery

This option determines how the printer handles data that was printing when an error occurred.

Disabled. The printer will not reprint the label that was printing when the error condition occurred.

Enable. The printer reprints the label that was printing when the error condition occurred.

96

Page 96
Image 96
Printronix T4204 manual Tear-Strip Time, Clip, Error Recovery