Twinax Emulation Menu

Graphic Chek Err

Allows overriding of the host setting for the SGEA (Set Graphic Error Action) command. For more information about the SGEA command, refer to the Coax/Twinax Programmer’s Reference Manual.

Enable. The host setting for the SGEA used by the printer. If the SGEA command is requested to stop on graphic errors, the printer will stop when a graphic error is detected.

Disable. Ignores the SGEA command from the host. The printer does not stop when an error is detected; instead, it substitutes the character selected in the Graphic Chek Code parameter.

Graphic Chek Code

Specifies the replacement character to print in place of any unprintable character that is received from the host. Choose a character from hex 40 through hex FE. The character becomes the printer default when:

The printer is powered off and then powered on.

An SGEA command specifies to use the operator panel default.

The Graphic Chek Err parameter is disabled.

LAC Option

Allows the host system to load alternate character images into the printer. This may be used for designing graphics, bar codes, and charts, or for printing in foreign languages.

Enable. Prints the LAC character as defined.

Disable. Ignores the LAC definition from the host and prints from the currently selected character set.

LAC Approx.

Specifies whether or not to use the LAC Approximation feature. For more information about the LAC Approximation feature, refer to theCoax/Twinax Programmer’s Reference Manual.

On. (default) Always converts the emulated character cells to standard cells.

Off. Passes the character data through the printer without conversion.

Set Text Orientn

Specifies the direction in which characters are printed on the page. This allows the printer to print languages that are printed right to left instead of left to right.

Control By Host.

Left To Right.

Right To Left.

161

Page 161
Image 161
Printronix T4204 manual Graphic Chek Err, Graphic Chek Code, LAC Option, LAC Approx, Set Text Orientn