Chapter 2 Loading Fanfold Media
7.Rotate the media width adjustment tab down and slide it over until it is flush with the fanfold media. Check the location of the media sensor, and refer to “Sensor Assembly Horizontal Adjustment” on page 47.
1
Legend:
1)Media Width Adjustment Tab
8.Close the printhead by pressing down on both sides of the front of the printhead assembly.
9.Adjust the label pressure control knob to match the width of the label stock in use.
Label Width | Pressure Control | |
Knob Settings | ||
| ||
|
| |
|
| |
2 inches or Less | 2 inches | |
|
| |
Greater Than 2 inches | 4 inches | |
|
|
36
