ENGLISH
Setting items |
| Setting details | ||
Dynamic EQ® | ON : Use Dynamic EQ. |
| ||
Solve the problem of | OFF : Do not use Dynamic EQ. |
| ||
deteriorating sound quality |
|
|
| |
as volume is decreased | • | is displayed when set to “ON”. | ||
by taking into account | ||||
• This can also be set by pressing DYN EQ on the | ||||
human perception and | ||||
room acoustics. Works with |
| remote control unit. |
| |
MultEQ. |
| Each time DYN EQ is pressed, the setting is changed as shown below. | ||
|
| Dynamic EQ : ON | Dynamic EQ : OFF | |
|
| Audio Adjust | |
Setting items |
| Setting details | |
Dynamic Volume® | Heavy : Most adjustment to softest and loudest sounds. | ||
Solve the problem of large | Medium : Medium adjustment to loudest and softest sound. | ||
variations in volume level | Light : Least adjustment to loudest and softest sounds. | ||
between TV, movies and | OFF : Do not use the “Dynamic Volume”. | ||
other content (between |
|
| |
quiet passages and | • | is displayed when set to “ON”. | |
loud passages, etc.) by | |||
|
| ||
automatically adjusting to | • If “Dynamic Volume” is set to “Yes” in Auto | ||
the user’s preferred volume |
| Setup (vpage 9), the setting is automatically | |
setting. |
| changed to “Heavy”. | |
Reference Level Offset Audyssey Dynamic EQ is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB. However, film reference level is not always used in music or other
0dB (Film Ref) : This is the default setting and should be used when listening to movies.
5dB : Select this setting for content that has a very wide dynamic range, such as classical music.
10dB : Select this setting for jazz or other music that has a wider dynamic range. This setting should also be selected for TV content as that is usually mixed at 10 dB below film reference.
15dB : Select this setting for pop/rock music or other program material that is mixed at very high listening levels and has a compressed dynamic range.
Setting is enabled when “Dynamic EQ” is “ON” (vpage 54).
• This can also be set by pressing DYN VOL on the | |
remote control unit. |
|
Each time DYN VOL is pressed, the setting is changed as shown below. | |
Dynamic Volume : OFF | Dynamic Volume : Heavy |
Dynamic Volume : Light | Dynamic Volume : Medium |
54
Remote control operation | Move the cursor | Confirm the setting | Return to previous menu | |
buttons | (Up/Down/Left/Right) | |||
|
|
