SVENSKA | NEDERLANDS | ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Convenient functions
Panel lock function
Playback in ZONE2 (Separate room)
Simple
To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel.
ON/STANDBY AUTO RETURN | VOLUME |
•You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located).
•You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2.
•There are two methods to do this, as described below. Choose one of the methods.
q ZONE2 playback by speaker output
w ZONE2 playback by audio output (PRE OUT) (using an external amplifier)
w ZONE2 playback by audio output
The audio signals connected to this unit’s ZONE2 output terminals (ZONE2 OUT) are output to the ZONE2’s amplifier and played with that amplifier.
Connection (ZONE2)
MAIN ZONE
version
Basic
ENTER p
nnDisabling all key button operations
Press ON/STANDBY while you press and hold AUTO and ENTER with the unit in standby mode.
q ZONE2 playback by speaker output
The ZONE2 audio signals are output from this unit’s SURR.BACK/AMP ASSIGN speaker terminals using the amplifier assignment function.
Connecting and setting the speakers
This unit
L |
R |
version
“Panel Lock:ON” appears on the display and all button operations except ON/STANDBY are disabled.
nnDisabling all button operations except VOLUME
Press ON/STANDBY while you press and hold AUTO and p with the unit in standby mode.
“Panel Lock:ON” appears on the display and all button operations except ON/STANDBY and VOLUME are disabled.
nnCanceling the Panel lock function
Press ON/STANDBY while you press and hold AUTO and RETURN with the unit in standby mode.
The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit using the remote control unit.
“Amp Assign” setting |
|
(vpage 56) and audio | Connecting the speakers |
signals output |
|
| MAIN ZONE |
This unit
| ZONE2 |
|
|
|
|
Output signal : |
|
|
|
| |
|
| ZONE2 | |||
Stereo (L / R) |
|
| |||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
ZONE2
R L
AUX
IN
•We recommend using high quality
•Also be sure to read the operating instructions of the connected devices.
NOTE
It is not possible to play the digital audio signals input from the HDMI, COAXIAL or OPTICAL terminals in ZONE2. Play using analog connections (in stereo).
Advanced version
Information
41