SVENSKA | NEDERLANDS | ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Operating learn mode
Erasing the all sources
1 Press and hold down SET and SOURCE SEL until the LEARN indicator blinks.
2 Press and hold down D.MODE and press ON and STANDBY . LEARN indicator lights.
3 Press ENTER to continue erasing.
• The SEND indicator blinks twice and the mode returns to LEARN mode.
• To cancel the erasing operation, do not press ENTER and simply press any
other button.
4 To return the normal mode, press SET.
NOTE
Setting the back light
Press the Light button on the side of the remote control, and the buttons on the remote control light for 2 seconds. If the Light button is pressed while the buttons are lit, the buttons remain lit for another 2 seconds.
• Backlight is set on in the factory settings.
nnDisabling the backlight
Press and hold both SET and STANDBY until the SEND indicator flashes twice.
nnTurning the backlight on
Press and hold both SET and ON until the SEND indicator flashes twice.
Simple version
Basic version
Advanced
Erasing codes will return to the factory preset code, or there will leave empty if the button has no factory preset code.
67
version
Information