ENGLISH
nnListening to preset stations
1 Press SHIFT/TOP MENU to select the memory block (A to G).
2 Press PRESET +, PRESET – or
1 – 8 to select the desired preset channel.
You can also operate via the main unit. In this case, perform the following operations. Press o p to select the preset radio station.
nnDirect frequency tuning
You can enter the receiving frequency directly to tune in.
1 Press SEARCH/INFO.
2 Input frequencies using the 0 – 9.
• If o is pressed, the immediately preceding input is cancelled.
3 When setting is completed, press
ENTER.
The preset frequency is tuned in.
nnTuner (FM/AM) operation
Operation buttons | Function | |
PRESET +, – | Preset channel selection | |
uio p | Cursor operation | |
ENTER | Enter | |
SEARCH | Direct frequency tuning | |
BAND | FM/AM switching | |
T.MODE | Switch search modes | |
TUNING +, – | Tuning (up/down) | |
0 – 9 | Preset channel selection (1 – 8) / | |
Direct frequency tuning (0 – 9) | ||
| ||
SHIFT | Preset channel block selection | |
MEMORY | Preset memory registration | |
TV POWER | TV power on/standby | |
(Default : Marantz) | ||
| ||
TV INPUT | Switch TV input | |
(Default : Marantz) | ||
|
Tuning in radio stations
Switching the tuning increment
The tuning increment factory settings are 9kHz for AM, and 0.05 MHz for FM.
ON/STANDBY AUTO DISPLAY
op
1While pressing down AUTO and DISPLAY, press ON/ STANDBY to turn on the power.
“Step 0 AM9/FM50 1” appears on the display.
2 Press o p.
“Step 0 AM10/FM200 1” appears on the display, and the tuning increment is switched to AM and FM are 10 kHz and 0.2 MHz.
3 Press ON/STANDBY.
•The tuner preset memory will be cleared if this operation is performed.
•This setting will not revert to the default values even when the microprocessor is reset.
28