Marantz SR5005 manual M-Dax, Svenska, Nederlands, Español, Italiano, Français, Deutsch, English

	SVENSKA	NEDERLANDS
Manual EQ	Default settings are underlined.
Use the graphic equalizer to adjust the tone of each speaker.
“Manual EQ” can be set when “MultEQ®” setting (vpage 53) is “Manual”.
Setting items	Setting details
Adjust CH	q Select the speaker tone adjustment method.
Correct the tone of each	All CH : Adjust the tone of all speakers together.
speaker.	L/R CH : Adjust the tone of left and right speakers together.
	Each CH : Adjust the tone of each speaker.
	w Select the speaker.
	e Select the adjustment frequency band.
	63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
	• Select the speakers you want to adjust when “L/R” or “Each” is
	selected.
	r Adjust the level.
	–20.0dB – +6.0dB (0.0dB)
Base Curve Copy	Yes : Copy.
Copy “Audyssey Flat” curve	No : Do not copy.
from MultEQ.	“Base Curve Copy” is displayed after Audyssey Auto Setup has been
	performed.
Default	Yes : Reset to the defaults.

The “Manual EQ” settings No : Do not reset to the defaults. are returned to the default

settings.

ESPAÑOL	ITALIANO	FRANÇAIS	DEUTSCH	ENGLISH
				Audio Adjust
M-DAX			Default settings are underlined.

Compressed audio formats such as MP3, WAV, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals.

Setting details

OFF : Do not use M-DAX.

Low : Optimized mode for compressed sources with normal highs.

Mid : Apply suitable bass and treble boost for all compressed sources.

High : Optimized mode for compressed sources with very weak highs.

•This item can be set with analog signals or when a PCM signal (fs = 44.1/48 kHz) is input.

•This cannot be set when the surround mode is set to “DIRECT” or “PURE DIRECT”.

• When set to “OFF”, the M-DAX indicator on the front panel switches off.

• This can also be set by pressing M-DAXon the remote control unit. Each time M-DAXis pressed, the setting is changed as shown below.

OFF LOW MID

	HIGH
Audio Delay	Default settings are underlined.

While viewing video, manually adjust the time to delay audio output.

Setting details

0ms – 200ms

• This item can be set within the range of 0 to 200 ms when “Auto Lip Sync” is set to “ON” and when a TV compatible with Auto Lip Sync is connected.

•Store “Audio Delay” for each input source.

•Audio Delay for game mode can be set when “Video Mode” (vpage 49) is set

to “Game”.

• You can also adjust the time to delay audio output after pressing DLY followed by the o p on the remote control, instead of using the menu operation.

Simple version

Basic version

Advanced version

Information

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	55
buttons	(Up/Down/Left/Right)