Marantz SR5005 manual Audio Adjust, Surround Parameter, Menu operation, English

Press MENU.

The menu is displayed on the TV screen.

ENGLISH

Audio Adjust

The sound being played in the surround mode can be adjusted to your liking.

The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode. For details on the adjustable parameters, see “Surround modes and surround parameters” (vpage 74).

Menu operation

1 Press AMP to set the remote control unit to amplifier operation mode.

2

3 Press ui to select the menu to be set or operated.

4 Press ENTER to enter the setting.

• To return to the previous item, press RETURN.

• Exiting the Menu, press MENU while the menu is displayed. The menu display disappears.

Items that can be set with the Audio Adjust procedure

Surround Parameter (vpage 52)

Tone (vpage 53)

Audyssey Settings (vpage 53)

Manual EQ (vpage 55)

M-DAX(vpage 55)

Audio Delay (vpage 55)

Surround Parameter Default settings are underlined.

Adjust surround sound parameters. It may not be possible to set this item depending on the input signal.

Setting items	Setting details
HT-EQ	ON : “HT-EQ” is used.
Soften the treble range	OFF : “HT-EQ” is not used.
of movie soundtracks for
	This can also be set by pressing HT-EQon the
better understanding.
	remote control unit.
D.Comp	Low / Mid / High : These set the compression level.
Compress dynamic range	OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).
DRC	Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range	the source. This can be set in the Dolby TrueHD mode.
(difference between loud	Low / Mid / High : These set the compression level.
and soft sounds).	OFF : Dynamic range compression is always off.
LFE	–10dB – 0dB
Adjust the low-frequency	For proper playback of the different sources, we recommend setting
effects level (LFE).
	to the values below.
	• Dolby Digital sources : “0dB”
	• DTS movie sources : “0dB”
	• DTS music sources : “–10dB”
Center Image	0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
Panorama	ON : Set.
Assign front L/R signal also	OFF : Do not set.
to surround channels for
wider sound.
Dimension	0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
Center Width	0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.

52

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu
buttons	(Up/Down/Left/Right)