ENGLISH
Connections (Advanced connection)
REMOTE CONTROL jacks
When you use this unit connected to Marantz audio components, it sends operation signals to operate each component.
nnConnection
Use the remote connection cable (supplied with a Marantz audio component you want to connect) to connect the REMOTE CONTROL OUT terminal of this unit to the REMOTE CONTROL IN terminal of the component to be connected.
nnSetting
Set the remote control switch located on the rear panel of the connected audio component to “EXTERNAL” or “EXT.” to use this feature.
•This setting will disable remote sensor reception of the connected audio component.
•To operate the connected audio component, point the remote control at the remote sensor of this unit.
Wireless receiver
RX101 (vpage 18)
RS-232C connector
By connecting an external serial controller, you can control all sorts of household electrical devices (including lights, electric curtains, and air conditioning units) in addition to your audio and video devices.
External serial controller
DC OUT (TRIGGER OUT) jacks
When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit.
The DC OUT (TRIGGER OUT) jack outputs a maximum 12 V/150 mA electrical signal.
12 V/150 mA
in Set as Necessary
Set to change the conditions for linked operation via the DC OUT (TRIGGER OUT) jack.
“DC Trigger” (vpage 61)
REMOTE | REMOTE | REMOTE |
CONTROL | CONTROL | CONTROL |
IN OUT | IN OUT | IN OUT |
CD Recorder | DVD Player | CD Player |
EXTERNAL INTERNAL | EXTERNAL INTERNAL | EXTERNAL INTERNAL |
Remote control unit
NOTE
To use wireless receiver RX101 as external IR receiver, set the remote sensor function of this unit to “DISABLE” (vpage 62 “Remote control settings”).
NOTE
If the permissible trigger input level for the connected device is larger than 12V/150mA, or has shorted, the DC OUT (TRIGGER OUT) jack cannot be used.
In this case, turn off the power to the unit, and disconnect it.
38
