ENGLISH
Playback
1 Press Z2 to switch the remote control operating mode.
The remote control unit switches to the operating mode for ZONE2.
2 Press ON to turn on the ZONE2 power.
The 
indicator on the display lights.
• When STANDBY is pressed, ZONE2 turns off.
• Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit.
3 Press INPUT df.
The audio signal of the selected source is output to ZONE2.
•Turn INPUT SELECTOR after pressing ZONE SELECT on the
main unit to select an input source.
When power for both MAIN ZONE and ZONE2 is set to ON, power of the MAIN ZONE only can be turned off. Press STANDBY.
Adjusting the volume
Use VOLUME + – to adjust the volume.
GAdjustable rangeH – – –
(When the “Volume Display” (vpage 60) setting is “Relative”)
GAdjustable rangeH | 0 – 41 – 99 |
(When the “Volume Display” (vpage 60) setting is “Absolute”)
•At time of purchase, “Volume Limit” (vpage 59) is set to
Turn MASTER VOLUME after pressing ZONE2 SELECT on the main unit to adjust the sound volume.
Turning off the sound temporarily
Press MUTE.
The sound is reduced to the level set at “Mute Level” (vpage 60) in the menu.
•To cancel, either adjust the volume or press MUTE again.
•The setting is canceled when the zone’s power is turned off.
42
