SVENSKA | NEDERLANDS | ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Connections
Simple
Important information
•Make connections as follows before using this unit. Select an appropriate connection type according to the components to be connected.
•You may need to make some settings on this unit depending on the connection method. Refer to each description for more information.
•Select the cables (sold separately) according to the components being connected.
NOTE
•Do not plug in the power cord until all connections have been completed.
•When making connections, also refer to the operating instructions of the other components being connected.
•Be sure to connect the left and right channels properly (left with left, right with right).
•Do not bundle power cords together with connection cables. Doing so can result in noise.
version
BasicConverting input video signals for output (Video conversion function)
This unit is equipped with three types of video input connector (HDMI, Component video and video) and |
|
three types of video output connector (HDMI, Component video and video). | • The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, |
Use the connectors corresponding to the components to be connected. | |
This function automatically converts various formats of video signals input to this unit into the formats used | formats. |
to output the video signals from this unit to a monitor. | • Resolutions of |
version
NOTE
Video device
Input
Output(IN)
This unit | Monitor |
| |
Output |
|
(MONITOR OUT) | Input |
•HDMI signals cannot be converted into analog signals.
•When a
•Component video input signals cannot be converted into Video format.
Advanced version
HDMI connector | HDMI connector | HDMI | HDMI connector |
|
| connector |
|
Component video | Component video | Component video | Component video |
connectors | connectors | connectors | connectors |
Video connector | Video connector | Video connector | Video connector |
13
Information