SVENSKA | NEDERLANDS | ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Connecting an antenna
NOTE
Keep the power cord unplugged until the SiriusConnect Home Tuner connection have been completed.
nnPositioning the antenna
For a consistent satellite signal, the antenna must be positioned correctly. Use the following map to determine which area you are in and position the antenna accordingly.
|
|
|
| SKY |
| NORTH |
|
|
|
WEST | q | t | r | EAST |
|
|
| ||
| w |
| e |
|
HORIZON
SOUTH
Area 1 Point the antenna toward the sky in the east, northeast, or southeast, either through a window or outside.
Area 2 Point the antenna toward the sky in the north or northeast, either through a window or outside.
Area 3 Point the antenna toward the sky in the north or northwest, either through a window or outside.
Area 4 Point the antenna toward the sky in the west, northwest, or southwest, either through a window or outside.
Area 5 Put the antenna outside and point it straight up. The antenna cannot be used indoors.
Connect a device that has a multichannel output terminal
•You can connect this unit to an external device fitted with multi- channel sound audio output jacks to enjoy music and video.
•The video signal can be connected in the same way as a
Cables used for connections
| Audio cable (sold separately) |
| ||
Audio cable | (White) | L | L | |
(Red) | R | R | ||
| ||||
Audio cable |
|
|
| |
External decoder
|
|
| AUDIO |
|
|
|
SUB- | FRONT | CENTER SURROUND | SURROUND | |||
WOOFER |
|
|
|
| BACK | |
| L | R | L | R | L | R |
| L | R | L | R | L | R |
L | R | L | R | L | R |
in Set as Necessary
To play analog signals input from 7.1CH INPUT terminals, set “Input Mode” (vpage 50) to “7.1CH INPUT”.
“7.1CH INPUT” can also be selected with A/D on the remote control unit.
When a device is connected to the SBL/SBR terminal of 7.1CH INPUT terminals, set “Amp Assign” (vpage 56) to “Normal”.
Connecting a external power |
| Simple |
amplifier |
| |
|
| |
• You can use this unit as a | version | |
to each of the channels provides an even greater sound presence. | ||
available power amp to the PRE OUT connector. Adding a power amp |
| |
• Select the connector to use and connect the device. |
| |
Cables used for connections
| Audio cable (sold separately) |
| Basic | ||
Audio cable | (White) | L | L | ||
|
|
| |||
(Red) | R | R | version | ||
| |||||
Audio cable |
|
|
| ||
|
|
|
| ||
Power amplifier
|
|
| AUDIO |
|
|
|
|
|
|
| |
SUB- | FRONT | CENTER SURROUND | SURROUND | ||
WOOFER |
|
|
|
| BACK |
| L R |
|
| L R | L R |
|
|
|
|
|
|
L | R | L | R | L | R | Advanced | |
L | R | L | R | L | R | ||
version | |||||||
|
|
|
|
|
|
• When using just one surround back speaker, connect it to the left |
| |
channel (L) terminal. |
| |
• Use the volume control on the subwoofer to control subwoofer |
| |
volume. | Information | |
• If the subwoofer volume sounds low, use the volume control | ||
| ||
provided on the subwoofer to adjust the volume. |
| |
NOTE |
|
•When speakers have been connected to PRE OUT terminals, do not connect the speakers to the speaker terminals.
•The output channels for the PRE OUT connector change to SBL and SBR in the “Amp Assign” (vpage 56) settings in the menu.
21
