Magnavox ZV450MW8A Troubleshooting, Press OPEN/CLOSE a, Repairing process MAY not work

TROUBLESHOOTING

DVD

Symptom			Remedy
There is no picture.			• If the main menu appears on the TV screen, press [RETURN] to exit.
			• Check if the progressive scan mode is set correctly according to your TV
			(page 88).
Picture noise appears.			• Clean the disc with a cleaning cloth.
There is no sound.			• If you are using DIGITAL AUDIO OUT (COAXIAL) jack, check the setting in
			“Disc Audio” (pages 84-85).
			• Clean the disc with a cleaning cloth.
Sound is noisy.			• Clean the disc with a cleaning cloth.
No DTS sound is output.			• This unit is not compatible with DTS sound.
The disc does not play back.			• No disc is inserted.
			• A blank disc is inserted.
			• The disc is upside down. Insert the disc with the labeled side facing up.
			• The disc is not correctly inserted.
			• The unit cannot play back certain discs (such as a CD-ROM) (page 54).
			• The region code on the DVD-video does not match the unit (page 54).
			• Moisture has condensed inside the unit. Remove the disc and leave the
			unit turned on for about 2 hours until the moisture evaporates (page 4).
			• If the disc was recorded on another recorder, the unit cannot play back
			the disc if it was not finalized.
Discs recorded on this unit cannot be			• If you are using DVD-RW/-R, please ensure you finalized the disc after
played back on other DVD players.			recording (pages 52-53).
The disc does not start playback from			• Resume playback was activated (page 60). Press [STOP C] twice.
the beginning.			• You have inserted a disc whose title menu or DVD menu automatically
			appears on the TV screen when it is first inserted.
The unit starts playing back the disc			• The DVD-video features an auto playback function.
automatically.
Some functions such as stop, search,			• Depending on the disc, you may not be able to do some of the
or slow-motion playback cannot be			operations. Refer to the instruction manual supplied with the disc.
performed.
The language for the sound track			• The title does not have the multilingual audio tracks.
cannot be changed.			• The DVD-video prohibits the changing of the language for the sound
			track.
The subtitle language cannot be			• Multilingual subtitle are not recorded on the DVD-video.
changed or turned off.
The angles cannot be changed.			• Multi-angles are not recorded on the DVD-video being played back.
			• The angle-change operation is whenever possible as long as the disc
			contains a multi-angle portion. Actual change will be performed when
			the portion has come up.
			• The DVD-video prohibits changing angles.
			• Try changing the angle using the DVD-video’s menu.
Recording does not stop immediately			• It may take a few seconds for the unit to input disc data before
after you press [STOP C].			recording stops.
The disc tray does not open when you			• It may take a few seconds for the disc tray to open after you have
press [OPEN/CLOSE A].			recorded or edited a disc. This is because the unit is adding disc data to
			the disc.
“Repairing” appears on the TV screen.			• If there is a power failure or unplugging during recording, finalizing,
			formatting or editing (even after “Repairing” disappears), a repairing
			process will begin automatically just after turning the unit on again.
	Repairing
			It may take several minutes up to about several hours.
In a case you intend to cancel the			• If you intend to cancel the repairing process, press [OPEN/CLOSE A]
repairing process.			on the front panel, then select “Yes” and press [OK]. After that, press
			[OPEN/CLOSE A] to take out the disc. The disc canceled during the
	Do you want to cancel a repairing		repairing process MAY NOT work.
	process? When selecting “Yes”,
	the disc may not be usable.
		Yes
		No
	Repairing

94 EN