Magnavox ZV450MW8A Display cont’d, OSD Language Default English, Screen Saver Default 10 minutes

SETUPS

Display (cont’d)

1 OSD Language (Default : English)

Set the language for the on-screen display.

Use [K / L] to select a setting, then press [OK].

OSD Language

English

Français

Español

Your setting will be activated.

2 Screen Saver (Default : 10 minutes)

Set the time to activate the screen saver function on the TV screen.

Use [K / L] to select a setting, then press [OK].

Screen Saver

OFF

5 minutes

10 minutes

15 minutes

30 minutes

Your setting will be activated.

3 FL Dimmer (Default: Bright)

Set the front panel display brightness.

Use [K / L] to select a setting, then press [OK].

FL Dimmer

Auto

Bright

Dark

You can choose one from “Auto”, “Bright” and “Dark”. If “Auto” is selected, the display gets dark when the power is off.

5 V-Chip

You can set the viewing limitation for the digital TV programs to prevent your children from watching inappropriate programs.

This feature is available only after the digital TV ratings have been downloaded

•The ratings can be downloaded by the unit automatically if it is available in your area.

1)Use [the Number buttons] to enter the access password.

If you have not set the password, first, use [the Number buttons] to set the access password, then press [OK]. The number you entered will be stored as the access password.

Password Input

2) Use [K / L] to select a desired item, then press [OK].

V-Chip

A Downloadable Rating

B Change Password

A Downloadable Rating

Set the rating system via digital broadcasting, or clear the downloaded ratings.

If the broadcasting signal does not have the downloadable rating information, the message below will appear.

Downloadable Rating is currently not available.

•This message will also appear when you try to access “DOWNLOADABLE RATING“ after you have cleared the downloadable rating information, and the new information has not been downloaded since.

To set the rating:

Use [K / L] to select “BLOCK SETTING” then press [OK] to show the various types of ratings. Use [K / L] to select a desired rating to set, then press [OK] to show the levels for the rating. Use [K / L] to select a level, then press [OK] to switch “VIEW” or “BLOCK”. If you set one level to “BLOCK”, all the higher levels will be turned to “BLOCK” automatically.

To clear the downloadable rating information and its setting:

Use [K / L] to select “CLEAR DOWNLOADABLE RATING”, then press [OK].

B Change Password

Change the current password.

Use [the Number Buttons] to enter new access password.

Note

•When you forget the access password at step 1), enter 4,7,3,7 using [the Number buttons] in the password input window. Password will be cleared.

•Depending on the type of rating system, you may set the levels individually.

EN 87

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español