Philips SCD505 user manual Guarantee and service, Reset the baby monitor

2To disable ECO mode, press and hold for two seconds.

»»The ECO mode indicator goes out and the parent unit reboots.

Reset the baby monitor

To reset the parent unit:

1Press and hold to turn off the parent unit.

2Press and hold on the parent unit.

3When you hold , turn on the parent unit. »»The parent unit is reset.

To reset the baby unit:

1Follow the same procedure as you reset the parent unit.

Optimize the battery life of the parent unit

•Recharge the parent unit when you see the low battery icon or hear the low battery alert tone. Fully recharge the parent unit before you use it again, as completely draining the rechargeable batteries may reduce their life.

•Remove the rechargeable batteries from the parent unit if you are not going to use it for a week or longer.

•Always fully recharge the parent unit after a long period of disuse.

•Remove the parent unit from the charging dock after it is fully charged.

•If you experience any issue with the rechargeable batteries of your parent unit, you may contact your dealer or a Philips service centre.

6Guarantee and service

If you need service or information or if you have a problem, please visit the Philips AVENT website at www.philips.com/AVENT welcome or contact the Philips Consumer Care Centre in your country.You can find the phone number of the Philips Consumer Care Centre in the worldwide guarantee leaflet. If there is no Philips Consumer Care Centre in your country, please visit the local Philips dealer.

12EN