Printronix T4204 manual SPC Coax Params, SPC Type, Logical Buff Size, Image Buff Size

SPC Coax Params

SPC Coax Params

CTHI

(from page 148)

Simp Prot

Conv

SPC Coax

Params

SPC Type

PTX NI* Avatar Comp

Logical Buf

Size

960

1920*

2560

3440

3564

Image Buf Size

4K*

2K

Intervention

Req

Send To Host* Do Not Send

* = Factory Default

Buffer Print

Disable*

Enable

Translation Tbl

PA1

PA2

Buffer Reprint

SPC Null Supp

Disable*

Enable

NL @ MPP+1

On*

Off

SPC Type

•Avatar Compatible. This option causes the printer to line wrap at 132 characters despite the current print density allowing more characters per line.

•PTX NI (Printronix Non-impact). This option causes the printer to not line wrap at 132 characters.

Logical Buff Size

Refers to the size of the printer buffer, which should be set the same as the host screen (buffer) size. If the host screen size is unknown, use 1920.

Image Buff Size

This option refers to the printer base buffer size. This size must be set to a value greater than or equal to the Logical Buffer Size.

Intervention Req

•Send to Host. The printer sends a signal to the host computer when the CANCEL key is pressed or a printer fault or hold mode time-out occurs.

•Do Not Send. No signal will be sent to the host computer.

163