Panasonic AJ-D950, AJ-PD950 Table of Auto OFF Error messages, Counter display Monitor display

Table of AUTO OFF Error messages

Counter display	Monitor display
CAP ROTATE TOO	CAP ROTA TOO
SLOW	SLOW
CAP TENSION ERROR	CAP TENSION ERROR
DEW	DEW

DRUM ROTATE TOO	DRUM ROTA TOO
FAST	FAST
DRUM ROTATE TOO	DRUM ROTA TOO
SLOW	SLOW
E-FF	E-FF
FRONT LOAD ERROR	FRONT LOAD ERROR

FRONT LOAD MOTOR FRONT LOAD MOTOR

LOADING MOTOR LOADING MOTOR

Description	VTR operation
	(Restart condition)
If the capstan motor speed is abnormally low, the	STOP
AUTO OFF lamp lights, and the message display	(POWER OFF	ON)
flashes.
If an abnormal tension at the supply side is detected	STOP
in the capstan mode, the AUTO OFF lamp lights, and	(POWER OFF	ON)
the message display flashes.
If condensation is detected, the AUTO OFF lamp	EJECT
lights, the message display flashes, and the VTR is
transferred to the eject mode. After the tape is (Normal operation
ejected, the drum rotates in order to eliminate the	resumed after
condensation.	condensation is
When the condensation has been eliminated, the	eliminated)
AUTO OFF lamp and message display go off, and the

VTR can be used.

<Notes>

1)If condensation is detected in the eject mode, the drum starts rotating as soon as it is detected.

2)If condensation is detected when the cassette has been inserted, the drum rotation is stopped, and after the tape is ejected, the drum starts rotating.

If the cylinder motor speed is abnormally high, the	STOP
AUTO OFF lamp lights, and the message display		ON)
flashes.	(POWER OFF
If the cylinder motor speed is abnormally low, the	STOP
AUTO OFF lamp lights, and the message display	(POWER OFF	ON)
flashes.
If the tape start and tape end are detected simulta-	STOP
neously either during or after loading, the AUTO OFF	(POWER OFF	ON)
lamp lights, and the message display flashes.
The AUTO OFF lamp lights and the message display
flashes when the take-up reel has been rotating idly	STOP
for a fixed period of time while the start/end	(POWER OFF	ON)
processing operation during loading (half position) is
being performed.
If the cassette does not move up even when 6
seconds have elapsed since the VTR was transferred
to the eject mode, the AUTO OFF lamp lights, and the
message display flashes.	STOP
<Note>	(POWER OFF	ON)
If the cassette does not move down inside the
machine even when 6 seconds have elapsed since
the cassette was inserted, the VTR is transferred to
the eject mode.
When the unloading operation is not completed within
6 seconds, the AUTO OFF lamp lights, and the
message display flashes.	STOP
<Note>	(POWER OFF	ON)
When the loading operation is not completed within 6
seconds, the VTR is transferred to the eject (unload-
ing) mode.

- 7 4 -