2Wire 78-13885-03 appendix Config# boot config-boot# reboot

Appendix A Upgrading Your CSS Software

Upgrading Your CSS

8.Determine whether to have the CSS archive the contents of the running-config file to the startup-config file.

•Enter y to archive the contents of the running-config file to the startup-config file.

•Enter n to keep the same startup configuration.

Archive running-config to startup-config? [y n q] y

archive running-config startup-config

The script copies the ADI from the FTP server, unpacks and installs it, and sets it as the primary boot-file.

Attempting ftp of sg0710002.adi.gz:

#copy ftp DEFAULT_FTP ${new_version_adi} boot-image

Copying (-) 57,241,012

Completed successfully.

#

(config-boot)# unpack ${new_version_adi}

unpacking(/) 99%

(config-boot)#

setting primary boot-file sg0710002

9.If you decided to reboot the CSS with the installed ADI in Step 7, the CSS reboots automatically. If you made the ADI the primary boot-file and archived the contents of the running-config file to the startup-config file, the CSS automatically performs a flash upgrade, if necessary, and then boots the new image.

To manually reboot the system, enter the following commands:

(config)# boot (config-boot)# reboot

10.After you upgrade the software in a CSS 11506 that contains a passive SCM, use the passive sync command in boot-config mode (or the passive sync macro command) immediately after upgrading your CSS software to synchronize the boot configurations on the redundant SCMs. Refer to Chapter 1, Logging In and Getting Started, the “Configuring a Boot Configuration Record for the Passive SCM” section.

	Cisco Content Services Switch Adminisitration Guide
A-10	78-13885-03