2Wire 78-13885-03 appendix Remove sg0710001 y n q? y Attempting to delete sg0710001

Appendix A Upgrading Your CSS Software

Upgrading Your CSS

Note The script will not offer to delete a version that you have configured as the primary or secondary boot file. On a flash disk-based system, you may need to quit and then deselect the primary or secondary boot file before continuing with the upgrade.

4.If necessary, remove the ADI.

•Enter y to remove the displayed ADI version.

•Enter n for the script to display another version to remove.

•Enter q to exit from the script.

remove sg0710001 [y n q]? y

Attempting to delete sg0710001

5.At the prompt, enter the file name and extension of the GZIP-compressed ADI version to install, and verify the information you entered. For example:

Please Enter Version to Install:sg0710002.adi.gz

Note If you are using an uncompressed version of the ADI from the FTP server, include the adi file extension (for example, sg0710002.adi).

Upgrade to Version sg0710002? [y n q] y

6.Determine whether to set the ADI as the primary boot-file.

•Enter y to set the ADI as the primary boot-file and change the CSS configuration.

•Enter n to keep the same primary boot-file configuration.

Set primary boot-file to Version sg0710002? [y n q] y

7.Determine whether to have the CSS reboot with the ADI you are installing.

•Enter y to reboot the CSS with this ADI after the upgrade is done.

•Enter n to not reboot the CSS with the ADI after the upgrade is done.

Reboot with Version sg0710002? [y n q] n

	Cisco Content Services Switch Adminisitration Guide
78-13885-03		A-9