Studer Innotec
16
ACTIVATION OF THE FUNCTION SMART-BOOST If your AC-In source is limited in power, the Xtender can work as a support and add the missing
power for your loads.
First of all, check that you have adapted the Xtender to your source (see previous chapter:
Adaptation to the source {1107})
The basic display is the following:
Press 3 times the key « arrow downwards » to display the
following screen:
If you go overpass this screen you can come back to it by
means of the key « arrow upwards »
Press the key SET to access the settings.
Then again the key SET to access the basic parameters.
Press the key DOWN to access the following parameter: the
menu of disabling. Then again the key SET to get to the menu.
Go down with the key DOWN until the function Smart-Boost
authorization parameter {1126}.
You can now authorize the function. Press the key SET to
access this parameter in modification mode, then the keys UP
or DOWN to change the option. To end up, validate with the
key SET.