RCC
11
INTRODUCTION
Congratulations! The purchase of an RCC remote control offers you unlimited access to the various
functions of the devices in the Xtender series. Numerous configurations that can now be accessed
allow you to optimise the operation of the installation. Despite all these options, the Xtender works
on a simple basis.
Different figure scenarios as well as associated configurations are presented at the end of this
manual.
The manual for the RCC remote control is divided into several distinct parts:
The first part is devoted to the adjustments of the RCC remote control, whether this is the language
used or the clock, which are sometimes necessary for the whole installation to work well.
The second part is concerned with immediate information on the installation. This gives access to
the electric values such as the battery voltage, inverter load and many more.
The third part shows the functions for saving events occurring in the installation. This may be
necessary for diagnosing a weakness or simply to check that the whole unit is working well during its
whole service life.
The fourth part, which is more technical, presents various options for configuring the Xtender.
Do not change the configurations except when you have the technical knowledge; otherwise, the
operation of the installation could at risk or installation itself could be partly damaged.
MODELS CONCERNED The RCC remote control may be connected to any Xtender, the use of which is clearly detailed in
its operating instructions.
CONTROLS AND INDICATORS The RCC remote control is equipped with four operating keys as well as a graphic display
with back-lighting. The function of the keys may change according to the context of
utilisation and a reminder of the function in progress is given at the right of the display.
Generally the keys UP and DOWN are used to alter values or options relating to what is on
the display and the two central keys are used to access, confirm or quit the item shown.
If the back-lighting function is activated, pressing one of the keys starts it up.
SD CARD The RCC remote control is equipped with an SD (smart data)-type memory card
reader. This card (not supplied) is used for various functions described in this
manual. It allows, amongst others, the following
functions: recording statistics, updates, backups or
restoration of configurations or adjustments. The
filing system used for the data is the FAT system. This
card can be read using any standard SD card
reader.
As far as the RCC-03 is concerned, the use of the
SD card requires removing the remote control since
the access to the SD lies behind.