¾Wall Mounting Instructions
Tools Required (Not Included)
Tools and parts | Drill & Drill Bit | 1 | |
required for Plaster | Phillips Head Screw Driver | 1 | |
and or Wood | Expanding Wall Anchor | 8 | |
Installation | Wooden Slats | 2 | |
| Wall Mounting Kit Includes the following: |
| |
| Wall Hanging Bracket | 2 | |
| 1” Phillips Head Screws | 4 | |
Description | Plastic Spacers | 2 | |
½” Phillips Flat Head Screws | 2 | ||
| |||
| Exhaust Pipe | 1 | |
| ½” Phillips Round Head Screws | 3 |
** It is recommended to complete the following procedure with at least 2 people **
As wall materials vary, supplied hardware for fixing to the wall may be inappropriate for your wall type. Consult your local hardware / home improvement center for suggestions on the necessary hardware for your particular wall type.
a)Determine the position where you will be installing the mounting bracket.
•This dryer is not designed to sit on top of your washing machine.
•A minimum of 2 inches is required between the top of the dryer and the ceiling above to allow easy installation and adequate spacing for exhaust.
If mounting above a top load washing machine, allow sufficient spacing to open the lid of the washer or in the case of a front loading washer allow sufficient breathing space.
b)Although the supplied mounting brackets can be installed directly to the wall using the existing wooden studs, the preferred method of installation is using wooden slats that provide a flat level installation surface and added stability to the whole wall installation.
c)Use two wooden slats (not included) between the studs to mount the brackets.
Required wooden slat size
23” Long x 3 ½” High x 1” Deep
When using the wooden slats to install on drywall material you must use expansion wall anchor bolts to safely secure the slats to the drywall.
8
