Use Jet-Dry Rinse Agent
Filling the Dispenser
The rinse agent dispenser holds 3.5 oz. of rinse agent. Under normal conditions, this will last approximately one month. Try to keep it full, but do not overfill.
1)Make sure the dishwasher door is fully open.
2)Turn the dispenser knob to the left and lift it out.
3)Add rinse agent until the indicator window looks full.
4)Clean up any spilled rinse agent with a damp cloth.
5)Replace the dispenser knob.
Rinse Aid Setting
The amount of rinse agent released into the final wash can be adjusted.
The factory setting is at the midpoint. If there are rings of calcium
(hard water) spots on dishes, try a higher setting.
To adjust the setting
Remove the dispenser knob; then turn the adjuster counterclockwise
to increase the amount of rinse agent.
14
