Installation & Assembly
Microwave Oven Bracket Installation Instruction
For use with the following Avanti models:
Microwaves – MO7082MB, MO7191TW, MO7192TB, MO7103SST& MO8003BT
Refrigerators – Can be used with all Compact, Midsize & Counterhigh models except the
Parts List & | Before you start this installation make sure you have all the parts listed below. | |||
Hardware |
| Read entire installation sheet before you start assembly of this item. | ||
| Part Number | Qty | Description | |
A | MOM9705 | 1 | Mounting Bracket |
B | 1 | Allen Wrench |
C | 4 | No. 8 x 1” Phillips Pan Head | |
|
|
| Sheet Metal Screw |
D | 4 | Plastic Anchor (¼” x 1”) | |
|
|
|
|
E | 4 | No. 8 x 5/8 Phillips Hex Head | |
|
|
| Self Tapping Screw & Washer |
Installation Procedures:
1)Bracket Configuration:
Holes (A) and (B) are the existing holes in the upper part of the Metal bracket to be attached to the microwave oven. Holes (C), (D), (E) and (F) are also existing holes in the lower part of the Metal bracket to be installed on to the refrigerator. See illustration #1.
Illustration #1
1